DWYER 2010D Magnehelic Differential Pressure Gauge

www.envirotechindustrialproduct.in

DWYER 2010D Magnehelic Differential Pressure Gauge

 

Dual scale. Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant To Breakage. Provides Undistorted Viewing of Pointer And Scale.


DESCRIPTION

Dwyer 2000-10D Offers
Features

 

  • Measures Fan and Blower Pressures, Filter Resistance, Air Velocity, Furnace Draft, Pressure Drop Across Orifice Plates
  • Measures Liquid Levels With Bubbler Systems and Pressures in Fluid Amplifier Or Fluidic Systems
  • Checks Gas-Air Ratio Controls and Automatic Valves
  • Monitors Blood and Respiratory Pressures in Medical Care Equipment


Specifications

Dwyer 2000-10D Specifications

Range, in w.c. 0-10″w.c.
Range, Pa or kPa 0-2.5 kPa
Service Air And Non-Combustible, Compatible Gases
Housing Die Cast Aluminum Case And Bezel, With Acrylic Cover. Exterior Finish is Coated Gray to Withstand 168 Hour Salt Spray Corrosion Test.
Accuracy ±2% of FS (±3% on 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
Pressure Limits -20 in Hg to 15 psig† (-0.677 to 1.034 bar)
MP Option: 35 psig (2.41 bar)
HP Option: 80 psig (5.52 bar)
Overpressure Relief Plug Opens at Approximately 25 psig (1.72 bar), Standard Gauges Only
Temperature Limits 20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) With Low Temperature Option
Size 4″ (101.6 mm) Diameter Dial Face
Mounting Orientation Diaphragm in Vertical Position
Process Connections 1/8″ Female NPT Duplicate High And Low Pressure Taps – One Pair Side And One Pair Back
Weight 1 lb 2 oz (510 g)
MP & HP 2 lb 2 oz (963 g)
Agency Approval RoHS


Click Here For Complete Specifications On The Dwyer 2000-10D


Included

 

Additional Information:

www.envirotechindustrialproduct.in

Leave a Reply

Your email address will not be published. Required fields are marked *