Dwyer 2008D Magnehelic Differential Pressure Gauge 0-8″ 0-2 kPa.

www.envirotechindustrialproduct.in

 

Dwyer 2008D Magnehelic Differential Pressure Gauge 0-8″ 0-2 kPa.

 

Dual scale. Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant To Breakage. Provides Undistorted Viewing of Pointer And Scale.


DESCRIPTION

Dwyer 2000-8D Offers


Features

 

  • Measures Fan and Blower Pressures, Filter Resistance, Air Velocity, Furnace Draft, Pressure Drop Across Orifice Plates
  • Measures Liquid Levels With Bubbler Systems and Pressures in Fluid Amplifier Or Fluidic Systems
  • Checks Gas-Air Ratio Controls and Automatic Valves
  • Monitors Blood and Respiratory Pressures in Medical Care Equipment


Specifications

Dwyer 2000-8D Specifications

Range, in w.c.

0-8.0″w.c.

Range, Pa or kPa 0-2.0 kPa)
Service Air And Non-Combustible, Compatible Gases
Housing Die Cast Aluminum Case And Bezel, With Acrylic Cover. Exterior Finish is Coated Gray to Withstand 168 Hour Salt Spray Corrosion Test.
Accuracy ±2% of FS (±3% on 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
Pressure Limits -20 in Hg to 15 psig† (-0.677 to 1.034 bar)
MP Option: 35 psig (2.41 bar)
HP Option: 80 psig (5.52 bar)
Overpressure Relief Plug Opens at Approximately 25 psig (1.72 bar), Standard Gauges Only
Temperature Limits 20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) With Low Temperature Option
Size 4″ (101.6 mm) Diameter Dial Face
Mounting Orientation Diaphragm in Vertical Position
Process Connections 1/8″ Female NPT Duplicate High And Low Pressure Taps – One Pair Side And One Pair Back
Weight 1 lb 2 oz (510 g)
MP & HP 2 lb 2 oz (963 g)
Agency Approval RoHS


Click Here For Complete Specifications On The Dwyer 2000-8D


Included

Additional Information:

www.envirotechindustrialproduct.in

Leave a Reply

Your email address will not be published. Required fields are marked *