Dwyer Instruments RMA-22-SSV Flowmeters

Dwyer Instruments RMA-22-SSV Flowmeters

• Dwyer RMA-22-SSV Flow Meter, 2″ Scale, 2-25 LPM Air, SS Valve
• Model: RMA-22-SSV 

Accurate Within ±4% of Full Scale Reading. Scales Are Brushed Aluminum, Coated With Epoxy And The Graduations Are On Both Sides Of The Indicating Tube.

Description

 

Dwyer RMA-22-SSV 2 inch Scale, Stainless Steel Flow Meter, 2-25 LPM Air

Features

• Easy to read design – The direct reading scales eliminate troublesome conversions.
• Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore.
• The float is highly visible against a white background.
• Construction assures accuracy – All Rate-Master® Flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin.
• The result is accurate and repeatable readings.
• The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque.
• Precision metering valves of brass or stainless steel (specify BV or SSV on order) are available as an optional extra and permit precise flow adjustments.
• For vacuum applications, Model RMA units are available with top mounted valves (specify TMV in the model number).
• Installation is simple – The Rate-Master® Flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone.
• When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout.
• Surface mounted units can also be held in place by the piping.
• All mounting hardware plus installation and operating instructions are included.
• Easy-to-Interchange bodies – Within a given Series Rate-Master® flowmeter bodies can be instantly interchanged.
• Simply “unplug” the body from backbone and replace it with another.
• O-rings provide a tight seal on inlet and outlet.
• Piping remains undisturbed.
• Interchangeability is useful where different scale ranges are sometimes required at the same location in the laboratory or plant.
• Cleaning is easy- To release the plastic flowmeter body from the stainless steel backbone, just remove four screws.
• Pipe thread flow connections remain undisturbed.
• Remove the slide cover and the plug ball stop, clean the flow tube with soap and water and reassemble. It’s that simple.